Saw Cuts
All profiles and tubes can be cut to the length you require before we pack and ship them to you. There is a small cost for cutting.
Mitre cuts can also be done for you if required.
Common profiles and components requiring saw cuts:
- All Aluminium Profiles
- Grip Rail Profiles
- Hinge Leaf Profiles
- Aluminium Cover Profiles
- Rebate Profiles
- Groove Profiles
- Profile Bars
- Castor Rail Conveyors
- Roller Conveyors St
- Shafts
- Shaft Clamp Profiles
- Tubes for Roller Conveyors
- D30 aluminium tubes
Drilling
Some fasteners require a drill hole through the aluminium profile, usually as an access point for a tool or for adding a screw to a long length such as Hinge Leaf Profile.
Mitre Fasteners and Central Fasteners are best drilled using a specific jig.
We can do the drilling for you for a small cost per hole. Alternatively, there is detailed information on the drilling requirements on each of the product pages at au.item24.com.
Common components that require drilling into the aluminium profile:
- Standard Fasteners
- Universal Fasteners
- Mitre Fasteners
- Central Fasteners
- Universal Butt Fasteners
- Mitre Butt Fasteners
- Clamp Profile Fastening Sets
- Hinge Leaf Profiles
- Grip Rail Profiles
Tapping
Tapping involves creating a thread in the end face of the aluminium profile for a screw or similar. This is most easily done with a jig.
We can do the tapping for you for a small cost per hole. Alternatively, there is detailed information on the tapping requirements on each of the product pages at au.item24.com.
Common components that require tapping:
- Standard Fasteners
- Corner Fasteners
- Heavy Duty Hinges
- Clamp Profile Fastening Sets
- Corner Fastening Sets for Clamp Profile
- Knuckle Feet
- Castors
- Base Plates