Cap 8 40×40, black
0.0.026.01
Cap 8 40×40, grey
0.0.627.16
Cap 8 80×16, black
0.0.265.98
Cap 8 80×32, black
0.0.610.22
Cap 8 80×40, black
0.0.026.02
Cap 8 80×40, grey
0.0.627.18
Cap 8 80×80, black
0.0.026.37
End Caps for Smaller Profile 8
Cap 8 32×18, black
0.0.388.87
Cap 8 40×16, black
0.0.026.79
Cap 8 40×32, black
0.0.610.23
End Caps for Large Profile 8
Cap 8 120×40, black
0.0.418.54
Cap 8 120×80, black
0.0.418.57
Cap 8 160×16, black
0.0.373.00
Cap 8 160×28, black
0.0.026.80
Cap 8 160×40, black
0.0.265.39
Cap 8 160×80, black
0.0.265.40
Cap 8 200×28, black
0.0.474.07
Cap 8 40×40 N
Thanks to Cap 8 40×40 N, it now takes no time at all to securely cap a profile end while still leaving a groove open. A whole range of components such as sliders, holders and guide elements can then be slotted into the open groove.
Cap 8 40×40 N
0.0.624.47
Zinc Caps
Zinc Caps are screwed into the core bores. These Caps are particularly resistant to mechanical loading and changes in temperature. They can be unscrewed and screwed back on any number of times. They must be secured in the core bores in the profiles using countersunk screws 8 SF M7, 1×16. No threads need to be tapped to do this.
Cap 8 40×40 Zn, black
0.0.427.09
Cap 8 80×80 Zn, black
0.0.427.13
Countersunk Screw 8 SF M7.1×16, black
0.0.428.05